S-2.1, r. 13 - Regulation respecting occupational health and safety

Section 188.6 Disposition versions

2023-07-27

188.6. (Replaced).

O.C. 1187-2015, s. 3; O.C. 1112-2023, s. 3.

2016-01-14

188.6. A procedure describing the energy control method must include the following:

(1)  identification of the machine;

(2)  identification of the person responsible for the energy control method;

(3)  identification and location of every control device and of every energy source of the machine;

(4)  identification and location of every cutoff point of every energy source of the machine;

(5)  the type and quantity of material required for applying the method;

(6)  the steps required to control the energy;

(7)  where applicable, the measures designed to ensure the continuity of application of the energy control method during a staff rotation, in particular the transfer of required material;

(8)  where applicable, the applicable characteristics, such as the release of residual or stored energy, the required personal protective equipment or any other complementary protection measure.

O.C. 1187-2015, s. 3.